HEIDENHAIN IK 5000 Addendum - Manual (Page 34)

34 1 Operation
1
.1 Oper
ation
Additional tolerance check Axial Runout for
Plane feature
Axial runout tolerance can be applied to a Plane feature that is
perpendicular to a reference axis, e.g. plane to cylinder.
To apply axial runout tolerance:
 Measure a cylinder to be used as a reference in the tolerance
 Measure the plane to apply the axial runout tolerance to
 Select the Plane feature in the Features template
 Select Tools>Tolerance>Axial Runout
 Enter tolerance parameters
 Click ok
Tolerance results are displayed.
Select
Tools>Tolerance>Axial Runout Enter tolerance parameters and
click OK Tolerance results are displayed