HEIDENHAIN IK 5000 Addendum - Manual (Page 89)

IK 5000 QUADRA-CHEK 89
2.1 Set
u
p Shutdown
The Shutdown function applies to CNC enabled systems only. During
system shutdown the probe returns to a position defined in machine
coordinates regardless of probe type. The position may be specified
using X, Y and Z coordinates or by choosing the current probe location.
To specify the probe position at shutdown:
 Select Tools>CNC...
 Enter the Supervisor password into the Password field
 Select the Shutdown tab
 Select the Enabled checkbox
 Enter the X, Y and Z coordinates or click Use Current Location
 Click OK
Shutdown settings window