Yaskawa MP2300S Basic Module - Manual (Page 110)

3.2 Basic Module Connections
3.2.4 Ethernet Connector Details
3-19
Mounting and Wiring
3.2.4 Ethernet Connector Details
Connects to a personal computer or HMI device by Ethernet (100Base-TX /10Base-T).
( 1 ) Ethernet Connector Specification and Pin Arrangement/ Indicator Light
The following table provides the Ethernet connector specifications.
The following table provides Ethernet connector pin arrangement/ indicator light details.
( 2 ) Ethernet Cable
For the Ethernet cable, use a twisted pair cable with RJ-45 connector.
Name
Connector
Name
Number
of Pins
Connector Model
Module Side Cable Side Manufacturer
Ethernet Ethernet 8 RJ-45 CAT5 Socket RJ-45 CAT5 Plug Pulse Engineering, Inc.
Pin Number Signal Name Description
1 TXD+ Transmitted data + side
2 TXD- Transmitted data – side
3 RXD+ Received data + side
4 – –
5 – –
6 RXD- Received data – side
7 – –
8 – –
Display Name Display Color Description
LINK Yellow
Lit: Connect
Unlit: Unconnected
100M Green
Lit: Connected at 100Mbps, or automatically
negotiating
Unlit: Connected at 10Mbps
'VJGTPGV
.+0-
/
Ethernet Type Category Remarks
10Base-T Category 3 or more • When connecting to remote equipment through a hub: Straight cable
• When connecting to remote equipment without using a hub: Cross cable
100Base-TX Category 5 or more