Yaskawa MP2300S Basic Module User Manual
Page 197
Advertising
6.2 Communication with Other MP Series
6.2.1 When the MP2300S Acts as Slave (automatic receive function is used)
6-8
7.
Click Enable in the Automatically Reception Setting Dialog Box and then click the OK Button.
Note: For more information on Slave Side I/F Register Settings and Automatic input precessing delay time,
refer to 2.2.4 ( 4 ) (b)
Automatic Receive Setting Screen for Message Communication .
Now, the automatic receive function is set up when the MP2300S acts as a slave.
Caution
When any transmission or connection parameter is changed, the change will be reflected after FLASH has been saved and the
power is turned ON again.
Advertising