Yaskawa MP2300S Basic Module User Manual
Page 267
6.4 Communication with PLC Manufactured by Mitsubishi Electric Corporation (MELSEC protocol)
6.4.1 When the MP2300S Acts as Slave (automatic receive function is used)
6-78
3.
Click the Easy Setting Button in the Message Communication area of the connection parameter set-
ting.
4.
Set up the communication settings in the Message Communication Easy Setting Window.
How to set up in the Message Communication Easy Setting Window
c When automatic receive is used, select “1” for the Connect No.
d Set Port No. of MP2300S side (“10001,” for example).
e Select MELSEC for Communication Protocol Type, and click the Default Button.
f Select Connect Type (TCP, for example).
g Select Code (BIN, for example).
h Set Node port IP Address for the other device (MELSEC Q series) to be connected (“192.168.001.002,” for
example).
i Set Port No. of the other device (MELSEC Q series) to be connected (“10001,” for example).
j Click OK.
c
d
e
f
h
g
i
j