Yaskawa MP2300S Basic Module User Manual
Page 230
Advertising
6.2 Communication with Other MP Series
6.2.3 When the MP2300S Acts as Master (I/O message communication function is used)
6-41
Built-in Ethernet Communications
( 2 ) How to Set up the Remote Device (MP2300) to Be Connected
When the setting of transmission parameters (IP address, subnet mask) is already completed, start from step 3.
1.
Double-click the 218IF Tab in the Module Details of the module configuration definition.
2.
Set transmission parameters.
c
e
f
Advertising