RIGOL M300 - Manual (Page 12)

RIGOL
© 2007 RIGOL Technologies, Inc.
User’s Guide for DM3000 Series
1-2
General Inspection
Inspect a new DM3000 Digital Multimeter with the following steps:
1. Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the contents
of the shipment have been checked for completeness and the instrument has
been checked mechanically and electrically.
2. Check the accessories.
Accessories supplied with the instrument are listed in "Accessories" at Appendix
B of this guide.
If the contents are incomplete or damaged, please notify the RIGOL Sales
Representative.
3. Inspect the instrument.
In case of any damage, or defect, or failure, notify the RIGOL Sales
Representative.
If the shipping container is damaged, or the protective material shows signs of
stress, notify the carrier as well as your RIGOL sales office. Keep the shipping
materials for the carrier’s inspection.