Importing a still image from a usb flash drive, Assigning still images to channels 7 and 8, Deleting a still image – Roland V-60HD Multi-Format HD Video Switcher and UVC-01 USB Video Capture Kit User Manual

Page 19: Supported still-image formats and resolutions, Importing a still image, Video operations

Advertising
background image

19

Video Operations

Importing a Still Image from a USB Flash Drive

This imports into the unit a still image saved on a USB flash drive.

Supported still-image formats and resolutions

Still-image file formats that can be imported are as follows.

Explanation

Format

Bitmap (.bmp), 24-bit color, uncompressed
PNG (.png), 24-bit color
* Alpha channel is not supported.
JPG (.jpg), 24-bit color

Resolution

In conformity with system format (p. 12)

File name

No more than 8 single-byte alphanumeric characters
* Be sure to append the “.bmp,” “.png,” or “.jpg“ file

extension.

Importing a still image

NOTE

5

All video input stops while a still image is being

imported from a USB flash drive.

5

Large-size still-image files might take some time to import.

5

When you’re using a USB flash drive for the first time, be sure to

format it on the V-60HD (p. 34).

5

Depending on the USB flash drive, recognition of the flash

drive might take some time.

1.

Save the still image in the root directory of the USB flash

drive.

2.

Connect the USB flash drive containing the saved still image

to the USB MEMORY port.

3.

Select the [MENU] button

0

“USB MEMORY”

0

“LOAD STILL

IMAGE.”

4.

Use the [VALUE] knob to select “STILL IMAGE 1” or “STILL

IMAGE 2” as the memory where the still image is saved.

A “ ” symbol is displayed for memory where a still image is already

saved.

5.

Press the [VALUE] knob.

The USB LOAD screen appears. The names of the files on the USB

flash drive are displayed on this screen.

6.

Select the still image file you want to import, then press the

[VALUE] knob.

A confirmation message appears.
If you want to cancel the operation, press the [EXIT] button.

7.

Use the [VALUE] knob to select “YES,” then press the [VALUE]

knob.

The still image is imported into the unit.

8.

Press the [MENU] button to quit the menu.

Assigning Still Images to Channels 7 and 8

This takes a still image that has been captured or imported from a

USB flash drive, and assigns it to channel 7 or 8.

1.

Select the [MENU] button

0

“VIDEO INPUT”

0

“STILL/BKG

7/8”

0

“INPUT 7 ASSIGN” or “INPUT 8 ASSIGN.”

2.

Use the [VALUE] knob to select the memory where the still

image is saved.

A “ ” symbol is displayed for memory where a still image is already

saved.

3.

Press the [VALUE] knob to apply the setting.

4.

Press the [MENU] button to quit the menu.

MEMO

Assigning a monochrome picture (background color)

You can also assign a monochrome picture (background color)

to channel 7 or 8.
In step 2, set “INPUT 7 ASSIGN” or “INPUT 8 ASSIGN” to

“BACKGROUND.” Also, use “BACKGROUND COLOR” to specify

the background color.
* The background-color setting is shared by channels 7 and 8.

Deleting a Still Image

This deletes a still image saved in the unit.

1.

Select the [MENU] button

0

“SYSTEM”

0

“DELETE STILL

IMAGE.”

2.

Use the [VALUE] knob to select “STILL IMAGE 1” or “STILL

IMAGE 2” as the memory you want to delete.

A “ ” symbol is displayed for memory where a still image is saved.

3.

Press the [VALUE] knob.

A confirmation message appears.
If you want to cancel the operation, press the [EXIT] button.

4.

Use the [VALUE] knob to select “YES,” then press the [VALUE]

knob.

The still image is deleted.

5.

Press the [MENU] button to quit the menu.

Advertising
This manual is related to the following products: