Roland V-60HD Multi-Format HD Video Switcher and UVC-01 USB Video Capture Kit - Manual (Page 6)

6
Panel Descriptions
Top Panel/Side Panel
17
Side Panel
16
NO. Name Explanation Page
1
COMP/LMT indicators When the compressor is turned on for AUDIO IN 1–5/6, this lights up when compression is applied. p. 27
AUDIO INPUT LEVEL
[1]–[5/6] knobs
These adjust the volume level for AUDIO IN 1–5/6. p. 25
SIG/PEAK indicators This lights up when input via AUDIO IN 1–5/6 is detected, and when the volume level is too high. p. 24
2
[AUTO MIXING] button
This switches the Auto Mixing feature on and off. When the feature is turned on, the [AUTO MIXING]
button lights up.
p. 29
3
[MASTER OUTPUT] knob This adjusts the volume level for master out.
p. 25
MASTER OUTPUT level meter This displays the volume level for master out.
4
[PinP 1] button
[PinP 2] button
[SPLIT] button
This switches PinP or split video composition on and off. When the feature is turned on, the button lights
up.
p. 21
p. 22 [H/PGM-CTR] knob
PinP: This adjusts the horizontal display position of the inset screen.
Split: This adjusts the vertical and horizontal position of the video displayed above or on the left.
[V/PST-CTR] knob
PinP: This adjusts the vertical display position of the inset screen.
Split: This adjusts the vertical and horizontal position of the video displayed below or on the right.
5
[MIX] button
[WIPE 1] button
[WIPE 2] button
These select video transition effects. The selected button lights up.
p. 16
p. 37
[TIME] knob This sets the video transition time. p. 17
Side Panel
17
1
4
6
7
2 3
9
5 10
8
12
11
14
15
13