Video operations, Switching the video, Setting the operation mode – Roland V-8HD HDMI Video Switcher User Manual

Page 11: Using mix/wipe to switch video, About the operation mode for video transitions, When a/b mode

Advertising
background image

11

Video Operations

About the operation mode for video transitions

There are two operation modes for switching the video on the

PGM/A bus and PST/B bus: the “PGM/PST mode” and the “A/B mode.”
* With the factory settings, the operation mode is set to A/B mode.

Mode

Explanation

A/B

When the video fader is operated, the video at the

bus position toward which the video fader is flipped

always becomes the final output.
When the [CUT] or [AUTO] button is operated, the

video on the A bus and the video on the B bus

become the final output in alternation.

PGM/PST

The video on the PGM bus is always the final output.
The video on the PST bus is preset video (the video to

be output next).
Operating the video fader or the [CUT] or [AUTO]

button makes the final video output and the preset

video change places.

Setting the Operation Mode

1 .

Press the [MENU] button

0

”SYSTEM”

0

select

“PANEL OPERATION,” and press the [VALUE] knob.

2 .

Turn the [VALUE] knob to select “A/B” or “PGM/PST,”

and press the [VALUE] knob.

3 .

Press the [MENU] button to quit the menu.

Using Mix/Wipe to Switch Video

When A/B mode

The video at the end to which the video fader is flipped is always the

final output.

1 .

Flip the video fader all the way upward or downward.

Transition indicators

2 .

Press a Cross-point [1]–[8] button at the end to

which the video fader is not flipped to select the

preset video (the video to output next).

Lit red: Final output video
Lit green: Preset video (the video to be output next)

The preset video appears in the PVW section of the monitor.

3 .

Press the [TRANSITION] button to select the

transition effect.

The MIX or WIPE indicator is lit.

Mode

Explanation

MIX

The two pictures are blended together as the

video is switched.

WIPE

The original video is broken into by the next

video.

4 .

Move the video fader in the direction opposite to

the direction in step 1.

The video changes.

Switching the Video

Here’s how to switch between input video while applying an effect, and final output.

Advertising