Roland V-8HD HDMI Video Switcher - Manual (Page 35)

35
Audio Operations
Checking a Specific Audio Input (Solo)
Here’s how you can temporarily monitor a specific audio input via the
headphones (solo function).
* The solo function applies to the headphone output. It does not
affect output other than the headphones.
1 . Press the [MENU] button 0 ”AUDIO INPUT” 0 select
“INPUT 1”–“INPUT 8” or “AUDIO IN,” and press the
[VALUE] knob.
2 . Turn the [VALUE] knob to select “SOLO,” and press
the [VALUE] knob.
3 . Turn the [VALUE] knob to select “ON,” and press the
[VALUE] knob.
4 . Press the [MENU] button to quit the menu.
Outputting AUX-Bus Audio
You can output just AUX-bus audio from the AUDIO OUT jacks
(XLR and RCA) and the PHONES jack.
What’s AUX-bus audio?
Video and audio on video input channels selected using the AUX
[1]–[8] buttons is sent to the AUX bus (p. 16).
If you assign the AUX bus to the audio output jacks, the audio sent
to the AUX bus is output.
1 . Press the [MENU] button 0 “AUDIO OUTPUT” 0
select “OUTPUT ASSIGN,” and press the [VALUE] knob.
2 . Turn the [VALUE] knob to select “AUDIO OUT” or
“PHONES OUT,” and press the [VALUE] knob.
3 . Turn the [VALUE] knob to select “AUX,” and press
the [VALUE] knob.
Value Explanation
MASTER OUT Output the audio of the MAIN bus.
AUX Output the audio of the AUX bus.
4 . Press the [MENU] button to quit the menu.