Roland V-8HD HDMI Video Switcher - Manual (Page 37)

37
Other Features
Saving to a preset memory
NOTE
If “MEMORY PROTECT” (p. 60) is “ON,” you can’t save settings to a
preset memory.
1 . Use the [MODE] button to select “MEMORY.”
2 . Press and hold (for 2 seconds or longer) the MEMORY
button for the number where you want to save the
settings.
All of the MEMORY [1]–[8] buttons are briefly illuminated in light
blue, and the current settings are saved in the selected preset
memory.
Recalling a preset memory
1 . Use the [MODE] button to select “MEMORY.”
MEMORY [1]–[8] button illumination color
Light blue Currently selected memory
Blue Memories in which data is saved
Unlit Memories with no data (empty)
2 . Press the MEMORY button for the number whose
setting you want to recall.
The settings are recalled.
MEMO
5 The state of the [OUTPUT FADE] knob and [PHONES] knob are
not saved in preset memory.
5 The following settings are common to the unit (one set for the
entire unit), and therefore are not saved in preset memory.
– PRESET MEMORY menu
– CTL/EXP menu
– CAPTURE IMAGE menu
– SYSTEM menu
5 You can use the [MENU] button 0 “PRESET MEMORY” 0 “SAVE”
or “LOAD” to save or load a preset memory.
5 When recalling a preset memory, you can specify the individual
menu items that will be included in the recalled preset memory.
Make these settings in the PRESET MEMORY menu item “LOAD
PARAMETER.”
Initializing a preset memory
Here’s how you can initialize the settings of a specific preset memory
to the factory-set condition.
1 . Press the [MENU] button 0 “PRESET MEMORY” 0
select “INTIALIZE,” and press the [VALUE] knob.
2 . Turn the [VALUE] knob to select the preset memory
(MEMORY 1–8) that you want to initialize, and press
the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Turn the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The current settings are saved. When the operation is finished, the
message “COMPLETE” appears.
4 . Press the [MENU] button to quit the menu.
Saving/Recalling Settings (Preset Memory)
You can save the current settings, including the video/audio settings and the state of the operating panel, in preset memory and recall those
settings for use when necessary. The V-8HD is provided with eight preset memories.
About the last memory function
The V-8HD has a built-in Last Memory function. Last Memory is a function that saves the state of the unit that is in effect immediately before
power-down, and automatically restores the state at the next startup. The Last Memory function is enabled by default. If you want the unit to
recall a specific preset memory when it starts up, use the PRESET MEMORY menu item “START UP” to specify the preset memory number.