Roland V-8HD HDMI Video Switcher - Manual (Page 66)

66
Menu List
Menu item Value
(Bold: default) Explanation
AUX LINKED PGM
Specifies whether the same video as the PGM bus is sent to the AUX bus (AUX link).
OFF Use the AUX [1]–[8] buttons to select the video of the AUX bus.
AUTO LINK
MANUAL LINK
AUX link is enabled, and the same video as the PGM bus is sent to the AUX bus.
Temporarily disabling AUX link
When you press an AUX [1]–[8] button, the selection of the AUX [1]–[8] button
is enabled (lit green).
Re-enabling AUX link
AUTO LINK
When you operate the [AUTO] button etc. to switch the video of the PGM
bus, AUX link is automatically enabled.
MANUAL LINK
When you press the AUX [1]–[8] button that is currently selected (lit green),
AUX link is enabled.
OUTPUT FADE ASSIGN
Specifies the functions that occur when you turn the [OUTPUT FADE] knob to the left (TURN LEFT) or to the right
(TURN RIGHT).
TURN LEFT
TURN RIGHT
BLACK Fade out to black.
WHITE Fade out to white.
AUDIO Adjust the volume of the output audio.
BLACK&AUDIO
(TURN LEFT)
Simultaneously apply the fade-to-black and the output audio volume
adjustment functions.
WHITE&AUDIO
(TURN RIGHT)
Simultaneously apply the fade-to-white and the output audio volume
adjustment functions.
STILL 1–8 OUTPUT Outputs the specified still image.
USER 1 SW ASSIGN
USER 2 SW ASSIGN
Specifies the function of the USER [1] [2] buttons.
N/A
No function is assigned.
FREEZE
(USER 1)
Turns the freeze function on/off.
AUTO SWITCHING
(USER 2)
Turns the auto switching function on/off.
BPM TAP If AUTO SWITCHING is “BPM SYNC,” you can set the BPM by tapping the button.
INPUT 1–8 ASSIGN Selects the video that is assigned to the specified input.
STILL 1–8 OUTPUT Outputs the specified still image.
INPUT 1–8 MUTE Turns the mute function on/off for the audio of the specified input channel.
AUDIO IN MUTE Turns the mute function on/off for AUDIO IN audio.
OUTPUT MUTE Turns on/off the mute function for AUDIO OUT audio.
AUX MUTE Turns on/off the mute function for AUX-bus audio.
INPUT SCAN N
Consecutively switches the input video in the order of INPUT 1 0 8 each time
you press.
INPUT SCAN R
Consecutively switches the input video in the order of INPUT 8 0 1 each time
you press.
MEMORY SCAN N
Consecutively switches the preset memory in the order of 1 0 8 each time you
press.
MEMORY SCAN R
Consecutively switches the preset memory in the order of 8 0 1 each time you
press.
REC START/STOP
Controls the recorder's video record start/stop if a recorder that supports HDMI
REC TRIGGER functionality is connected.
LED DIMMER 1– 8 Adjusts the brightness of the LEDs.
LCD DIMMER 1– 8 Adjusts the brightness of this unit’s display.
ON SCREEN MENU
UPPER LEFT , UPPER RIGHT,
LOWER LEFT, LOWER RIGHT
Specifies the location of the OSD menu displayed on the multi-view monitor.
TALLY FRAME OFF, ON
Specifies whether the the tally frame is visible (ON) or hidden (OFF) in the
multi-view monitor.
AUX/PinP INDICATOR OFF, ON
If this is “ON,” a symbol is shown in the CH 1–8 section of the multi-view monitor.
[MODE] button Mark color Explanation
AUX Green Input channel being sent to the AUX bus
PinP 1 SOURCE Yellow Input channel specified as the PinP 1 source image
PinP 2 SOURCE Magenta Input channel specified as the PinP 2 source image
REC INDICATOR OFF, ON
Specifies whether a REC indicator is shown (ON) or not shown (OFF) to indicate
that the REC button has been pressed on a connected camera that supports
the HDMI REC TRIGGER function.