Roland V-8HD HDMI Video Switcher - Manual (Page 30)

30
Audio Operations
1 . Press the [MENU] button 0 ”AUDIO INPUT” 0 select
“INPUT 1”–“INPUT 8” or “AUDIO IN,” and press the
[VALUE] knob.
2 . Turn the [VALUE] knob to select “INPUT LEVEL,” and
press the [VALUE] knob.
3 . Turn the [VALUE] knob to adjust the input volume,
and press the [VALUE] knob.
4 . Press the [MEMU] button.
5 . Press the [MENU] button 0 ”AUDIO OUTPUT” 0
”MASTER OUTPUT” 0 select “OUTPUT LEVEL,” and
press the [VALUE] knob.
6 . Turn the [VALUE] knob to adjust the output volume,
and press the [VALUE] knob.
7 . Press the [MENU] button to quit the menu.
Level meter indication
The audio level meter is shown in each section of the multi-view
monitor.
The level meter illumination lets you check whether the volume is
adjusted appropriately.
Red (Excessive)
Yellow (Suitable)
Green
(Insufficient)
(dB)
-30
-20
-6
0
-50
Indicator Status
Red
Lights up at 0 dB or higher. It indicates an excessive
volume level.
Yellow
Lights up at -20 to -1 dB. It indicates an appropriate
volume level.
Green
Lights up at -50 to -21 dB. It indicates a too-low volume
level.
* If the volume level of speaker output is unsuitable even when
the volume level on the V-8HD has been adjusted so that level
meter light up in yellow, adjust the volume for the speakers
and amplifiers. Using “OUTPUT LEVEL” to make adjustments can
sometimes result in distortion or poorer sound quality.
MEMO
5 If the OUTPUT FADE ASSIGN (p. 29) setting is “BLACK&AUDIO”
or “WHITE&AUDIO,” using the [OUTPUT FADE] knob to fade-in/
out the output video will simultaneously fade-in/out the output
audio as well.
5 If the OUTPUT FADE ASSIGN (p. 29) setting is “AUDIO,” you can
use the [OUTPUT FADE] knob to adjust only the output volume.
5 You can output a test tone that is useful when making volume
adjustments.
In the SYSTEM menu item “TEST TONE” (p. 67), specify the test
tone that you want to output.
Adjusting the output volume of the AUX bus
1 . Press the [MENU] button 0 ”AUDIO OUTPUT” 0
”AUX” 0 select “AUX LEVEL,” and press the [VALUE]
knob.
2 . Turn the [VALUE] knob to adjust the output volume,
and press the [VALUE] knob.
3 . Press the [MENU] button to quit the menu.
Adjusting the Volume Level
Here’s how to adjust the volume of the audio input and audio output.