Switching aux output, Video operations, Selecting the aux output – Roland V-8HD HDMI Video Switcher User Manual

Page 16

Advertising
background image

16

Video Operations

1 .

Use the [MODE] button to select “AUX.”

The AUX/PinP SOURCE/MEMORY [1]–[8] buttons function as AUX-

bus selection buttons.

2 .

Press an AUX [1]–[8] button to select the AUX-bus

video.

The AUX output is switched.

MEMO

5

The display shows a green square (AUX indicator) for the input

channel that is being sent to the AUX bus.

5

For details on adjusting the volume of the AUX bus audio, refer to

“Adjusting the output volume of the AUX bus” (p. 30).

The colors of lighted AUX [1]–[8] buttons

When the [MODE] button is lighted in green, the AUX [1]–[8] buttons

also function as indicators showing the status of video input.

Button

Explanation

Lit white

Valid video is being input.

Blink white

Video whose format differs from the system format

setting is input.

Unlit

No video is input.

Sending the same video as the PGM output to the

AUX output

By using the AUX link function, you can send the same video as the

PGM bus (the final output video) to the AUX bus.

1 .

Press the [MENU] button

0

”SYSTEM”

0

select

“AUX LINKED PGM,” and press the [VALUE] knob.

2 .

Turn the [VALUE] knob to select “AUTO LINK” or

“MANUAL LINK,” and press the [VALUE] knob.

If you're not using the AUX link function, turn this “OFF.”

3 .

Press the [MENU] button to quit the menu.

Selecting the AUX output

In the case of “OFF”

Press an AUX [1]–[8] button to select the video of the AUX bus.

In the case of “AUTO LINK” or “MANUAL LINK”

AUX link is enabled, and the same video as the PGM bus is sent to the

AUX bus.

Temporarily disabling AUX link

When you press an AUX [1]–[8] button, the selection of the AUX [1]–

[8] button is enabled (lit green).

Re-enabling AUX link

AUTO LINK

When you operate the [AUTO] button etc. to switch the
video of the PGM bus, AUX link is automatically enabled.

MANUAL LINK

When you press the AUX/MEMORY button that is currently
selected (lit green), AUX link is enabled.

Switching AUX Output

You can use button operations to directly select the video to send to the AUX bus.

Advertising