Roland V-8HD HDMI Video Switcher - Manual (Page 44)

44
Other Features
Returning to the Factory Settings
(Factory Reset)
Here’s how you can return the settings of the V-8HD to their factory-
set state. If following the procedures described in this manual does
not cause the result you expect, try executing a factory reset.
NOTE
5 When you execute factory reset, any previously specified content,
any settings saved in preset memory (p. 37), and the still image
(p. 26) saved in the unit will all be lost.
5 Do not turn off the power while the “PLEASE WAIT” message is
shown.
1 . Press the [MENU] button 0 “SYSTEM” 0 select
“FACTORY RESET,” and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 . Turn the [VALUE] knob to select “YES,” and press the
[VALUE] knob.
The factory reset is executed.
When the operation is finished, the message “COMPLETE” appears.
3 . Press the [MENU] button to quit the menu.