Roland V-8HD HDMI Video Switcher - Manual (Page 38)

38
Other Features
Saving a new settings file
1 . Press the [MENU] button 0 “USB MEMORY” 0
select “BACKUP ALL SETTINGS,” and press the
[VALUE] knob.
2 . Turn the [VALUE] knob to select “NEW FILE...,” and
press the [VALUE] knob.
3 . Enter the file name.
1 . Turn the [VALUE] knob to move the cursor.
Moving the cursor to a location where no character is present
increases the number of characters.
2 . Turn the [VALUE] knob to highlight the character at the
cursor location.
3 . Turn the [VALUE] knob to change the character, and press
the [VALUE] knob.
5 Pressing the [EXIT] button deletes the character at the cursor
location.
5 You can enter a text string of up to 9 characters in length.
5 The extension of the file name is “V08.”
4 . When you finish entering the name, turn the [VALUE]
knob to select “SAVE,” and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 . Press the [VALUE] knob.
The file (*.V08) is newly saved on the USB flash drive.
6 . Press the [MENU] button to quit the menu.
Overwrite-saving a settings file
1 . Press the [MENU] button 0 “USB MEMORY” 0
select “BACKUP ALL SETTINGS,” and press the
[VALUE] knob.
2 . Turn the [VALUE] knob select the file to overwrite,
and press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 . Press the [VALUE] knob.
The file (*.V08) is newly saved on the USB flash drive.
4 . Press the [MENU] button to quit the menu.
Saving the Unit’s Settings on a USB Flash Drive
You can group together the unit’s settings into a single file (*.V08) and save it to a USB flash drive connected to the USB MEMORY port.
You can access the saved file (*.V08) on the USB flash drive and load it into the unit for use when needed.
* When you’re using a USB flash drive for the first time, be sure to format it on the V-8HD (p. 39).
* Depending on the USB flash drive, recognition of the flash drive might take some time.
Saving