Connecting cables to the aircraft – Sony AG-R2 Attachment Grip User Manual
Page 37
Advertising
Airpeak S1
ARS-S1
Connecting cables to the aircraft
Remove the top cushioning (
) from the outer box and place it on a flat surface. Holding the aircraft
securely by the frame arms (
), place it upside down on the cushioning.
Be careful to keep the propeller attachment points (
) of each motor off the surface.
1
Connect the cables to the connection hub on the aircraft.
Control cable (aircraft — gimbal)
Power cable (aircraft — gimbal)
USB Type-C
®
cable (aircraft — gimbal)
Front of aircraft
Connect the control cable (aircraft — gimbal) (
) to the control port (
).
Insert fully until the plug locks into place.
Rear of aircraft
2
37
Advertising