Sony AG-R2 Attachment Grip - Manual (Page 59)

Help Guide
Airpeak S1
ARS-S1
Cautions when using the remote controller
When using the remote controller to fly an aircraft, turn off the Wi-Fi
®
and Bluetooth
®
functions of the tablet or other
mobile device mounted on the remote controller.
Take care not to cover the parts containing the built-in antennas (a) with your hand, cables, or other objects.
Point the handle bar (with built-in antenna) (b) of the remote controller toward the aircraft as shown in the illustrations
below.
(b) Handle bar (with built-in antenna)
If you do not operate the remote controller for 5 minutes while it is turned on, an alarm will go off. After another
minute, the remote controller will automatically go into a standby state. You can stop the alarm by performing an
operation such as moving the control stick, pressing a button, etc.
If you notice any damage to the remote controller antenna, contact Sony Customer Support. It may not be possible to
operate the aircraft.
You need to link the remote controller and aircraft when you replace the remote controller or are using a new one.
When you turn off this product, be sure to turn off the aircraft first and then the remote controller. If you turn off the
remote controller while the aircraft is still turned on, you will not be able to operate the aircraft in case it moves
accidentally. If this happens, it may cause an accident or damage to the aircraft.
Hint
If wireless communication is disrupted, try turning off Wi-Fi ® , Bluetooth ® , or other wireless communication functions on your
surrounding computers or smartphone.
59