Adjusting the balance of the gimbal – Sony AG-R2 Attachment Grip User Manual
Page 53
Airpeak S1
ARS-S1
Adjusting the balance of the gimbal
Adjust the balances of the tilt (
), roll (
), and pan (
) axes.
Preparation
Confirm that the camera lens cap is removed.
Confirm that the camera and gimbal are connected using the USB cable.
Turn on the camera to avoid movements of the focus unit in the lens.
Confirm that the aircraft is turned off.
Confirm that you have installed all the accessories you want to use.
Adjust the balance of the tilt axis.
Adjust the horizontal and vertical balances of the tilt axis.
Horizontal balance adjustment of the tilt axis
Vertical balance adjustment of the tilt axis
1
Loosen the top camera screw (
) and bottom lever (
), and then slide the camera plate (
) forward or
backward to adjust the balance.
1.
After adjusting the balance, firmly tighten the top camera screw (
) and bottom lever (
).
2.
Rotate the tilt frame (
) by about ±15° to check if the balance is adjusted properly.
If properly adjusted, the tilt frame (
) will stay still or return to the horizontal position.
3.
53