Extron electronic 3000B - Manual (Page 11)

Exatron 3000B
www.exatron.com 1-5 Chapter 1 Introduction
The Model 3010B
with One Elevated Temperature Track
The Model 3010B Hot Rail adds a single track hot rail to the input of the handler. This track holds twenty
inches of devices in order to preheat them prior to test. The temperature range of the Hot Rail is ambient
to +125
° C. AC heaters are located within the Hot Rail. Exceptional temperature control is maintained by
constantly monitoring four points in the Rail and four points in the Test Site. The guaranteed accuracy is
±3° C everywhere in the Soak Rail and ±2° C in the Test Site. All four "zones" in the hot rail are controlled
by an E XATRON -designed computerized temperature controller.
The input of the Hot Rail has a manually operated two-input tube holder assembly.
All Model 3010B Handlers are supplied with a Free Rolling E XATRON Dolly ("FRED.") For operation, the
handler is to be mounted onto this floor stand which has four large tires for easy positioning and four floor
jacks to lock it into place.
Also Available From Exatron:
The Model 2000B
with Two-Tube Manual Input
The Model 2000B is an ambient handler with a manually operated two-input tube holder assembly for low
to mid-volume handling applications. The tube holder must be manually shifted when one tube of devices
empties in order to present another tube of devices to the input track. The Model 2000B uses Snap On
Change Over Kits to accommodate various size packages. The tube holders are custom-machined to a
specific tube size and are included as standard equipment with Model 2000B Snap On Change Over Kits.
All Model 2000B Handlers are supplied with bench-top base plates which must be bolted directly to a
bench or table top to secure the handler. Although smaller and less expensive than our Model 3000B, the
2000B Series handlers are equipped with a broad range of features found in all E
XATRON handlers
including:
• Wide Variety of Device Handling Capability
• Quick Changeovers Using Modified Snap-On Change Kits
• Variety of Interfaces
• Positive Binning
• Plunge to Board Test Contact Mechanism
• ESD Safeguards
The Model 5000
Series of Production Handling Systems
The 5000 Series of production handlers integrate any combination of customer-specified ambient
temperature programming/test sites, hot chamber(s), elevated temperature test site(s) and a "smart" laser
marking system. In addition, automatic tube loader/reloader components from various manufacturers may
be integrated into E
XATRON ' S Model 5000 when the laser marking system option is specified.
When equipped with a laser marker, the entire system is controlled by a single 80486/33 computer.
One or more test sites are available on all of the various Model 5000 configurations. The E XATRON
Model 5000 Series of Heavy-Duty Handling Systems are ideal for automating high-volume program, test,
and mark applications.