Extron electronic 3000B - Manual (Page 14)

Exatron 3000B
www.exatron.com 1-8 Chapter 1 Introduction
Warning/Caution Labels
Y OUR NEW E XATRON HANDLER WILL ARRIVE WITH SOME OR ALL OF THE FOLLOWING WARNING LABELS ATTACHED :
EXATRON
PART NUMBER
LABEL TEXT
LAB03-001 DANGER - INVISIBLE LASER RADIATION WHEN OPEN ...
LAB03-004 DANGER - ELECTRICAL HAZARD
LAB03-006 CAUTION - DO NOT OPERATE WITHOUT GUARDS ...
LAB03-007 DANGER - WATCH YOUR HANDS AND FINGERS
LAB03-008 CAUTION - BEFORE CLEANING OR SERVICING ...
LAB06-001 CAUTION - HIGH TEMPERATURE
LAB09-001 THIS UNIT SOLD AND SERVICED BY ...
LAB09-002 WARNING! DON'T REMOVE WITH HANDLER POWER ON
(IN-HOUSE ONLY) THIS ORDER CONTAINS PARTICLE INTERCONNECT ...
5000-494 DANGER - DO NOT REMOVE OR DETACH ...
5000-958 CAUTION - HIGH PRESSURE AIR SOURCE
5000-967 CAUTION - CONTAINS HOT SURFACES
Availability of Warning Labels:
Current laws pertaining to the cautionary labels required to be installed on electronic equipment vary from
state to state. E
XATRON makes every attempt to comply with all known labeling laws and safety
considerations as they relate to our component handling systems. In effect, virtually every surface of the
handler could be covered with warning signs and labels. For aesthetic reasons, we choose to produce a
machine with a less cluttered appearance, while still providing adequate visual caution indicators.
Individual customers may wish to obtain additional labels to facilitate safe operation and service for this or
other electronic equipment in use at their locations. The labels listed above are shown in detail on the
following pages and may be purchased from the E
XATRON factory as desired. Our toll-free telephone
number is 1-800-EXA-TRON.