Extron electronic 3000B - Manual (Page 185)

Exatron 3000B
www.exatron.com 10-2 Chapter 10 Supplement
3. " DESCRIPTION"
This is the name assigned to the part. In most cases, this description will easily define the pat
you wish to locate. Please include this description when ordering replacement parts.
4. "ASSEMBLY "
Indicates which major system sub-assembly the part belongs to.
In most cases, the "Assembly" can be ordered as a complete replacement part.
5. "OPTIONS"
Some parts lists contain system options. "Options" indicates special parts which may be used
in your system.
6. "SIZE"
These are dimensions in inches. The dimensions are listed left to right from smallest to largest.
This is the starting size of the part prior to being machined. A x B x C
Imagine a cube drawn around a part you are trying to identify. The dimensions of this cube
can be checked against this size dimension and may be of assistance in determining a
required part number. When the parts list indicates another E
XATRON part number in the size
column, then the part was made by modifying an existing E XATRON part. The modification is
required for this handler only.
When ordering replacement parts, be sure to use the part number and not the size. If
the size column indicates, "see print," then the part is made from sheet metal, a PC board, or
is something which is not made from a solid cube of material.
7. "MATERIAL"
This designates the material from which the part was made. The "Material" column may also
indicate the manufacturer of the part.
6061: 6061 aluminum, machined part.
5052: 5052 aluminum, sheet metal.
WHT DEL: White delrin, plastic.
BLK DEL: Black delrin, plastic.
DEL AF: Brown delrin, High-temperature plastic.
PEEK: Very high-temperature plastic, beige in color.
TORLON: Very high-temperature plastic, dark green in color.
G-7: High-temperature fiberglass, white in color.
G-10/FR-4: Standard fiberglass. Either green or blue used in printed circuit boards.
SS: Stainless steel. See print for exact type.
BRASS: Brass material.
PYREX: Pyrex glass, high-temperature, transparent.
LEXAN: Lexan plastic, high-temperature, transparent.
LEDEX: Ledex solenoid modification.
ULTEMP: Amber colored plastic, high-temp., transparent
EM: Electro-mechanical solenoid modification.
COPPER: Copper material.
C
A
B