Fluke 5020A - Manual (Page 43)

Menu Functions
Display Menu
5
5-7
avu009.jpg
Figure 5-7. Sensor Channel Select
The B C buttons are used to edit the parameter value. The A D buttons are used to move
between parameters. Press the E button after all of the parameters have been edited.
The message ‘STORE VALUES’ is displayed. Press the E button to save the new
settings. The values are stored in the sensor. Press the F button to cancel any changes
and exit to the menu.
avu008.jpg
Figure 5-8. Sensor Cal
Display Menu
The DISPLAY menu provides functions for configuring the display. The functions that
appear in this menu are DISPLAY SETTING, DISPLAY LAYOUT, FIELD DATA,
GRAPH SCALE, and DISPLAY RESET.