Fluke 5020A - Manual (Page 93)

Digital Communications Interface
Commands
6
6-23
CALCulate[<chn>]:PARameter[<num>]:AVERage[<type>]:DATA?
Returns the specified statistical calculation for the specified channel.
This is the same as the CALCulate,chn.:PARameter<num>:AVERage<type>? command
(see ).
CALCulate[<chn>]:PARameter<num>:AVERage<type>:TYPE?
Returns the name of the specified statistical type for the specified channel.
Example: CALC1:PAR1:AVER4:TYPE?
Response: “T MAX”
The CALCulate suffix, <chn>, specifies the channel (1 or 2). The PARamenter suffix,
<num>, specifies temperature (1) or relative humidity (2). The AVERage suffix, <type>,
specifies the statistic: average (1), standard deviation (2), minimum (3), maximum (4),
spread (5), maximum rate (7), or alarm count (8). Temperature values are in the current
temperature unit, C of F.
CALCulate<chn>:PARameter<num>:RATE?
Returns the rate calculation for the specified channel in degrees C or F per hour for
temperature or % per hour for relative humidity.
Example: CALC1:PAR1:RATE?
Response: -0.74
The CALCulate suffix, <chn>, specifies the channel (1 or 2). The PARameter suffix,
<num>, specifies temperature (1) or relative humidity (2).
CALCulate[<chn>]:PARameter[<num>]:RATE:TIME? [MIN|MAX|DEF]
Returns the rate time span in seconds.
Example: CALC:PAR:RATE:TIME?
Response: 300
Specifying the MIN, MAX, or DEF parameter returns the minimum, maximum, or
default value respectively.
CALCulate[<chn>]:PARameter[<num>]:RATE:TIME <num>|MIN|MAX|DEF
Sets the rate time span for the specified channel in seconds.
Example: CALC:PAR:RATE:TIME 600
Specifying MIN, MAX, or DEF parameter sets the rate time span to the minimum,
maximum, or default value respectively. This command may be password protected (see
Password Commands).
CALCulate[<chn>]:PARameter<num>:RESolution? [MIN|MAX|DEF]
Returns the display resolution.
Example: CALC:PAR1:RES?
Response: 3
The PARameter suffix, <num>, specifies either temperature resoution (1) or relative
humidity resolution (2). The value returned indicates the number of decimal places.