Fluke 5020A - Manual (Page 79)

Digital Communications Interface
Interface Commands
6
6-9
specified channel
DATa:RECord:FREE? Returns the recording memory usage
DATa:RECord:OPEN? Returns the number of bytes in the open data set
DATa:RECord:OPEN
(<year>,<month>,<day>,<hour>,<minute>,<second>[,
<year>,<month>,<day>,<hour>,<minute>,<second>) Opens the range of data for reading
DATa:RECord:READ? [<num>] Returns a group of data
DATa:RECord:TIMe? Returns the data recording timer
DATa:RECord:TIMe <num>|MIN|MAX|DEF Sets the data recording timer
FETCh? [<chn>] Returns the temperature and humidity measurements
for the specified channel
FORMat:TDSTamp:STAT? Returns the state of the date/time stamp for
FETCh,MEASure, or READ command
FORMat:TDSTamp:STAT? <bool> Enables or disables the date/time stamp for FETCh,
MEASure, or READ command
INITiate no action
INITiate:CONTinous? Returns the continuous state (always 1)
MEASure? [<chn>] Returns the temperature and humidity measurements
for the specified channel
READ? [<chn>] Returns the temperature and humidity measurements
for the specified channel
ROUTe:CLOSe? [<chn>] Returns the state of the specified channel
ROUTe:CLOSe <chn> Enables the specified channel
ROUTe:OPEN? [<chn>] Returns the channel state
ROUTe:OPEN <chn> Disables the specified channel
SENSor:AVERage? Returns the state of the measurement averaging
SENSor:AVERage <bool> Enables or disables the measurement averaging
SENSor<chn>:LOCK? Returns the state of the sensor lock for the specified
channel
SENSor<chn>:LOCK <bool> Enables or disables the sensor lock for the specified
channel
SENSor<chn>:IDENification? Returns the sensor identification for the specified
channel
SENSor<chn>:IDENification <str> Sets the sensor identification for the specified channel
SENSor<chn>:STATus? Returns the sensor status for the specified channel
STATus:ALARm? Returns and clears the alarm status event
STATus:ALARm:CONDition? Returns the alarm status condition
STATus:ALARm:ENABle? Returns the alarm status enable