Fluke 5020A - Manual (Page 44)

5020A
Users Manual
5-8
avu010.jpg
Figure 5-9. Display Menu
Display Setting
The DISPLAY SETTING function allows you to select the temperature display
resolution (T RES), humidity display resolution (H RES), decimal preference, unit of
temperature and display contrast. These settings may be password-protected.
The temperature and humidity display resolutions are selectable between 0, 0.1, 0.01, and
0.001. These settings do not afect the resolution of recorded or printed data. Recorded
and printed data are fixed at 0.01°C or °F and 0.1% RH.
The decimal preference is selectable between a period (.) and a comma (,).
The available units of measure are degrees C and degrees F.
The contrast can be adjusted here using the B C buttons. Setting the adjustment number
more negative lightens the screen and setting it more positive darkens the screen. The
contrast may also be adjusted from the main screen by using the A D buttons.
avu011.jpg
Figure 5-10. Display Setting
The B C buttons are used to select the parameter setting. The A D buttons are used to
scroll between each parameter. Press the E button to change and save the new settings.
Press the F button to cancel any changes and exit to the menu.