Fluke 5020A User Manual
Page 75
Digital Communications Interface
Interface Commands
6
6-5
*OPT?
Returns configuration options
*RST
Sets the instrument operating parameters to defined
conditions
*SRE?
Returns the Service Request Enable register
*SRE <num>|MIN|MAX|DEF
Sets the Service Request Enable register
*STB?
Returns the Status Byte register
*TST? [<bool>]
Returns the self-test results (0: startup test; 1: new
test)
ALARm:BATTery?
Returns the battery alarm event
ALARm:BATTery:ENABle?
Returns the state of the battery alarm enable
ALARm:BATTery:ENABle <bool>
Enables or disables the battery alarm
ALARm:BEEP?
Returns the state of the alarm beep enable
ALARm:BEEP <bool>
Enables or disables the alarm beep
ALARm:CLEar
Clears the alarm events
ALARm:DATE:FIRST?
Returns the date of the first alarm event
ALARm:DATE:LAST?
Returns the date of the latest alarm event
ALARm:DISPlay?
Returns the state of the alarm display enable
ALARm:DISPlay <bool>
Enables or disables the alarm display
ALARm:POWer?
Returns the power loss alarm event
ALARm:POWer:ENABle?
Returns the state of the power loss alarm enable
ALARm:POWer:ENABle <bool>
Enables or disables the power loss alarm
ALARm:RHUMidity<chn>:LOW?
Returns the state of the low humidity alarm for the
specified channel
ALARm:RHUMidity<chn>:LOW:ENABle?
Returns the state of the low humidity alarm enable for
the specified channel
ALARm:RHUMidity<chn>:LOW:ENABle <bool>
Enables or disables the low humidity alarm enable for
the specified channel
ALARm:RHUMidity<chn>:RATE?
Returns the state of the humidity rate alarm for the
specified channel
ALARm:RHUMidity<chn>:RATE:ENABle?
Returns the state of the humidity rate alarm enable for
the specified channel
ALARm:RHUMidity<chn>:RATE:ENABle <bool>
Enables or disables the humidity rate alarm for the
specified channel
ALARm:RHUMidity<chn>:RATE:LIMit?
Returns the humidity rate alarm limit for the specified
channel
ALARm:RHUMidity<chn>:RATE:LIMit
<num>|MIN|MAX|DEF
Sets the humidity rate alarm limit for the specified
channel
ALARm:RHUMidity<chn>:SENSor?
Returns the state of the humidity sensor alarm for the
specified channel