Fluke 5020A - Manual (Page 57)

Menu Functions
Data Menu
5
5-21
avu028.jpg
Figure 5-27. Stats Print
Press the E button to save the new setting. Press the F button to cancel any changes
and exit to the menu.
Stats Reset
The STATS RESET function resets current statistics. Statistics will then be based on
measurements made from this time forward. After pressing the E button, a WARNING
message will appear requesting a confirmation of the operation. If the E button is
pressed the stats are reset. If the F button is pressed the operation is canceled.
avu029.jpg
Figure 5-28. Stats Reset
Stats Clear
The STATS CLEAR function clears all daily statistics stored in memory. After pressing
the E button, a WARNING message will appear requesting a confirmation of the
operation. If the E button is pressed the stats are cleared. If the F button is pressed
the operation is cancelled.