Finisar Surveyor - Manual (Page 134)

6-36
Surveyor
User’s Guide
Expert View (Expert plug-in only)
From Detail View, click on the button to open a window with Expert View.
From Summary View, set the view preferences to Expert View to see this view in
the first tab.
Multiple tables are available in Expert View. Select a layer on the left and tab on the
bottom to create the view you want. Expert View is not available as a chart. Refer to
the chapter on the Expert System for complete information on Expert Views.
Application Response Time View (Expert plug-in only)
From Detail View, click on the button to open a window with Application
Response Time View. From Summary View, set the view preferences to Application
Response Time View to see this view in the first tab.
Application Response Time View is available as a table showing connection time
and connection number information about application protocols. Application
response time view is not available as a chart. Use this table if you want to find out
which applications are responding very slowly in the network.
To calculate application response time, Surveyor causes a stimulus packet to be
transmitted so the application layer round trip time can be assessed. However, the
packet cannot be sent if the analyzer device used by Surveyor is connected through a
tap device.The application response time will only work if the transmit port of the
analyzer is directly connected to a switch port or device.
Multi-QoS View (Multi-QoS software only)
From Detail View, click on the button to open a window with Multi-QoS
views. Initially, the All Calls table displays. Multi-QoS views are not available from
Summary View.
Table 6-20. Application Response Time View, Column Descriptions
Table Column Description
Server Name Name or IP address of the transmitting server.
Protocol Name of the application protocol discovered
Minimum Time Shortest time taken for the application to make a connection
Maximum Time Longest time taken for the application to make a connection
Average Time Average time taken for the application to make a connection
Connections Number of connections processed for this application