Finisar Surveyor - Manual (Page 50)

3-10
Surveyor
User’s Guide
Data Views Toolbar
(Expert and Multi-QoS buttons)
Ring Statistics View button (Token Ring Only)
Brings up tables showing information about the rings and the ring
stations detected on the network. This button is available for Token
Ring adapters only.
MAC Statistics View button
Brings up MAC Statistics View for graphically viewing packet and
error counters. This view also contains module and capture buffer status
information. The view displays appropriate error counters depending on
the mode, capture or transmit.
Frame Size Distribution View button
Selects Frame Size Distribution View for viewing the distribution of
frame sizes.
Protocol Distribution View button
Selects Protocol Distribution View for viewing a chart of the
distribution of major protocols. Control buttons in this view allow you
to customize the way you view the protocol distribution.
Utilization/Error View button (Rx)
Brings up a strip chart that plots utilization and number of errors over
time. The table for this view contains packet counters and error counters
for receive.
Utilization/Error View button (Tx)
Brings up a strip chart that plots utilization and number of errors over
time. The table for this view contains packet counters and error counters
for transmit. (Packet Blaster plug-in only)