Finisar Surveyor - Manual (Page 180)

8-12
Surveyor
User’s Guide
Transmitting Capture Files
You can transmit the contents of a capture file as one of the streams in the Transmit
Specification. Place a capture file as a stream into the
Defined Streams list box using
the Add File… button.
The entire contents of the capture file is transmitted with timestamps intact. As with
any other stream, you can repeat transmission by using the
Repeat Stream field. All
other fields do not apply when the stream is defined by a capture file.
Transmit Specification Examples
Transmit Specification examples are supplied with Surveyor. Open a transmit
specification file (..\transmit subdirectory, .TSP extension) from the
Transmit
Specification dialog box to see examples.
Two Transmit Specification examples are shown in the following sections.
• The Packet Gaps example shows a specification made up of several streams
with different packet sizes that use packet gaps.
• The Bursts example shows a stream that uses bursts.
To find examples, look in the ..\examples\transmit directory.