Finisar Surveyor - Manual (Page 346)

11-12
Surveyor
User’s Guide
Ranges for the graph can be changed. An example configuration screen for setting
Call Jitter ranges is shown below. All values are in milliseconds.
Figure 11-5. Multi-QoS Configuration, Call Jitter Ranges
The default ranges for Call Jitter, Call RTCP Jitter, and Call Setup Time are shown
in the table below.
Table 11-2. Defaults for Call Jitter and Call Setup Time Ranges (in milliseconds)
Range Call Jitter Call RTCP Jitter Call Setup Time
Range 1 500 and up 500 and up 1000 and up
Range 2 100 - <500 100 - <500 500 - <1000
Range 3 50 - <100 50 - <100 300 - <500
Range 4 30 - <50 30 - <50 200 - <300
Range 5 10 - <30 10 - <30 150 - <200