Finisar Surveyor - Manual (Page 270)

10-66
Surveyor
User’s Guide
ICMP Destination Network Access Denied
Counter
ICMP Destination Network Access Denied events are counted in the ICMP All
Errors and the ICMP Destination Unreachable counters. A count of all destination
unreachable ICMP symptoms and a count of all ICMP errors displays in the
Overview counters of Expert View. A threshold can be set in Expert Alarms for all
destination unreachable ICMP errors or for all ICMP errors.
Expert Symptom
ICMP Destination Network Access Denied events are automatically logged as
expert symptoms. The
Symptom Summary field provides information about the IP
addresses involved. For example:
[206.250.228.69] cannot be reached by [206.250.228.11].
SA=[206.250.228.11] DA=[206.250.228.69]
Diagnostic Details
__________________________________________________________________
Problem Description:
An ICMP Destination Network Administratively Prohibited message has been sent.
__________________________________________________________________
Probable Cause(s):
1. If a router has a routing table problem, it may send this message.
2. A host may send this message if the network does not have proper access.
3. The source may have an incorrectly configured subnet mask.
__________________________________________________________________
Recommended Action(s):
1. Check the routing tables of the router that this message was generated from.
2. Check the netmask configuration of the source and/or the router.
3. Ignore this message if the network is truly prohibited (no action required).