Finisar Surveyor - Manual (Page 355)

11-21
Multi-QoS
Field Descriptions for Call Details
11
The following tables provide brief descriptions of all fields in the Call Detail win-
dow for SCCP, H.323, or SIP calls.
Table 11-7. SCCP Call Field Descriptions
Table Column Description
FID Frame ID of the first frame from which the conversation was detected.
This field is useful when doing post capture analysis. If there is a need
for in-depth analysis of a specific call, the first frame associated with
the call can be quickly determined.
Caller Name Caller’s name.
Caller Port TCP port of the end point initiating the call.
Caller Address IP Address of the end point initiating the call.
Caller Number Phone number of the calling party.
Start Time Time at which the call was started.
Stop Time Time at which the call was completed.
Setup Time (ms) Time that was taken for the call to be setup (the time taken from the
start of the call until the phone rings).
Callee Name Name of the receiver of the call.
Callee Port TCP port of the end point receiving the call.
Callee Address IP Address of the end point receiving the call.
Callee Number Phone number of the called party.
SCCP Version SCCP protocol Version used in this call.
Call Status Status of the call. An active call has the status of “Setting up” or “set up
complete”. A completed call has the status of “Set up failed”, “Aborted”,
or “Complete”.