Finisar Surveyor - Manual (Page 99)

6-1
Chapter 6
6
Views
There are numerous ways to view data from Surveyor. This section describes the
primary windows you use to view data, and the actual data views you can see within
each window.
The primary windows for viewing information are shown in Table 6-1.
The data views that can be seen within each primary window are described
independently. Although you may be viewing data for different purposes from each
primary view, the way the information is presented in a data view is virtually
identical no matter which primary view you are using.
Table 6-2 shows which data views are supported from each primary window.
Table 6-1. Surveyor’s Primary Windows for Viewing Information
Primary GUI Window Description
Summary View From Summary View you can see one view of many different
resources. Viewing options include configurable charts and tables.
Detail View From Detail View you can see many different views simultaneously of
a single resource.
Capture View From Capture View you can see many different views of previously
captured data. Although the data is “static”, the presentation of the
data is the same as for viewing real-time data.