Finisar Surveyor User Manual
Page 37
2-7
Installation
Installing Analyzer Hardware
2
8. Insert the Surveyor CD in the CDROM drive.
9. Enter the path of the Ethernet Driver directory (
<CDROM-drive-letter>\drivers
)
on the Surveyor CDROM and click
OK
.
10. The
Select OEM Option
window will appear. Select the “Finisar 10/100
Ethernet CardBus Adapter Plug & Play” driver. Click the
OK
button.
11. In the
Settings
window, all settings should remain as “CardWizard”. Click the
OK
button to begin copying driver software to your hard disk.
The system starts copying driver software. During the copy process, you
may receive a noncritical error message, “Cannot find file PSC1V1.hlp”.
Press
Ignore
to continue installation and complete copying driver software
to your hard disk.
12. To verify that the analyzer card is properly installed, open the
System
folder in
the
Control Panel
and expand the
Network
icon. If no error marks exist through
the
Network
icon, the installation is complete. If an error exists, highlight the
problem adapter in the Network folder and press the
Remove
button. Reboot
the notebook computer and attempt the installation again. If the problem
persists, contact Technical Support.
13. Reboot your system.
Installing the Portable Surveyor 10/100 Ethernet Analyzer Card, Windows 2000/XP
The Portable Surveyor 10/100 Ethernet Analyzer Card is not recognized
automatically by Windows 2000 at this time. You must update the driver manually
for the card to function properly.
1. Power down your system.
2. Insert the Portable Surveyor 10/100 Ethernet Analyzer Card into your system's
CardBus slot.
3. Secure the cable assembly to the Portable Surveyor 10/100 Ethernet Analyzer
Card and the RJ45 connector on the cable to the network (optional –
connection to the network may be performed after card installation is
complete).
4. Power up your system. Windows 2000 will detect the new card and display the
“New Hardware Found” message. Windows 2000 will recognize the Portable
Surveyor 10/100 Ethernet Analyzer Card as a Racore card and use the Racore
device driver. You must update the device driver for the card to function
properly.