Finisar Surveyor - Manual (Page 290)

10-86
Surveyor
User’s Guide
ICMP Source Route Failed
Counter
ICMP Source Route Failed events are counted in the ICMP All Errors and the ICMP
Destination Unreachable counters. A count of all destination unreachable ICMP
symptoms and a count of all ICMP errors displays in the
Overview counters of
Expert View. A threshold can be set in Expert Alarms for all destination
unreachable ICMP errors or for all ICMP errors.
Expert Symptom
ICMP Source Route Failed events are automatically logged as expert symptoms.
The
Symptom Summary field provides information about the IP addresses involved.
For example:
[206.250.228.69] cannot be reached by [206.250.228.11].
SA=[206.250.228.11] DA=[206.250.228.69]
Diagnostic Details
__________________________________________________________________
Problem Description:
An ICMP Destination Unreachable (Source Route Failed) message has been sent.
__________________________________________________________________
Probable Cause(s):
1. If a router has a routing table problem, it may send this message.
2. A router may send this message if it cannot route the packet.
3. The source may have an incorrectly configured subnet mask.
__________________________________________________________________
Recommended Action(s):
1. Check the routing tables of the router that this message was generated from.
2. Check the netmask configuration of the source.