Finisar Surveyor User Manual

Page 439

Advertising
background image

Glossary (continued)

Glossary-13

Traffic Rate

When transmitting from Surveyor, a percentage of the maximum capacity of the

network to carry packets.

Transmit Mode

One of the modes for using Surveyor. In transmit mode, data streams loaded are

transmitted on the network when the resource is started.

Transmit Specification

A definition of packets to be transmitted on the network by Surveyor.

Tx Attempt Counter

A counter of the number of transmission attempts that have failed.

Tx Defer Counter

A counter that shows the number of times the transmitter had transmit data avail-

able and was ready to transmit but had to defer transmission due to sensing other

traffic.

Tx Excessive Collision Counter

A counter that shows the number of times packets collided 16 times without suc-

cessful transmission.

Tx Excessive Defer Counter

A counter that shows the number of times the transmitter had to defer for greater

than 3,036 byte times.

Tx Late Collision Counter

A counter that shows the number of collisions that occur greater than 512 bit times

after a transmission has started.

Undersize

A counter showing the total number of packets received that were shorter than the

64 octets and were otherwise well formed (good FCS).

View

Any one of many displays of network data provided by Surveyor.

Very Long Event Counter

A counter that shows the number of times the transmitter is active for greater than a

maximum event length. The maximum event length is 4ms to 7ms for 10Mbps net-

work speeds and 0.4 to 0.75ms for 100Mbps network speeds.

Advertising