Finisar Surveyor - Manual (Page 85)

4-25
Configuring Surveyor
Advanced Configuration
4
Monitoring Non Well-Known Ports
Surveyor also collects information about a subset of ports that fall outside of the
WKP range, port numbers greater than 1023. These ports are called non-WKP.
Some of these ports are monitored by Surveyor since applications associated with
them are widely accepted. The non-WKP ports that Surveyor monitors and their
associated port values are listed in Table 4-11 and Table 4-12.
Surveyor treats all other non-WKP as a single entity given a single generic name.
The name for TCP non-WKP ports is “TCP OTHER”. The name for UDP non-
WKP ports is “UDP OTHER”. For example, if 900 occurrences of the TCP port
11964 was detected and 200 occurrences of the TCP port 10564, there would be a
single name to identify these 1100 occurrences of the TCP non-WKPs called “TCP
OTHER”.
Table 4-11. Default Names for Non-WKP TCP Ports
Name TCP port values
LOTUS NOTES 1352
TNS (Sybase) 1521
RSP 1704
TDS (Oracle) 2048
NFS 2049
CC:MAIL 3264
XWIN 6000-6063
Table 4-12. Default Names for Non-WKP UDP Ports
Name UDP Port Value
RADIUS 1645
RSP 1704
RADIUS 1812
HSRP 1985
NFS 2049
RTP 5004
RTCP 5005