Finisar Surveyor - Manual (Page 337)

11-3
Multi-QoS
Multi-QoS User Interface Overview
11
Multi-QoS User Interface Overview
The Surveyor Multi-QoS interface can be used with capture files, a capture buffer,
or in real-time monitoring mode. To view Multi-QoS graphs and tables, click on the
Multi-QoS button on the Detail View toolbar or select Multi-QoS View from the
Monitor or Capture menus.
The Multi-QoS view consists of tabs for viewing graphs of VoIP call data and
configuring the interface. Upon startup, the interface displays the Jitter tab, showing
a percentage breakdown of calls based on Call Jitter values that are greater than a
threshold value. Using the mouse, you can find more detailed information about
VoIP calls and VoIP call data. The figure on the next page shows the flow of the
interface from the highest level view to the most detailed view. The Multi-QoS
views can also be accessed by pressing the Multi-QoS
button on the Detail
View toolbar or by pressing Control + Q .
Multi-QoS Monitor and Capture views are nearly identical; however, some displays
and fields only apply to one or the other. The
Utilization tab only displays in
Monitor mode. Alarms can only be configured when in Monitor mode.