Finisar Surveyor - Manual (Page 187)

9-3
Alarms
Current Module Alarms
9
Press New Alarm to enable new alarms for a resource. The Alarm Editor dialog box
appears. Multiple alarms of any type may be added. See the following section for
more information on the Alarm Editor.
Figure 9-2. Alarm Editor
Highlight one or more alarms in the Current Module Alarm window. Press Modify
Alarm to modify the highlighted alarms. From the Modify Alarms dialog box, change
the characteristics for current alarms. The alarm variable name or alarm group name
cannot be changed. Use the
New Alarm option to add an alarm with a different
variable.
Figure 9-3. Modify Alarms
To delete one or more alarms, select the alarm(s) and press Delete Alarm in the
Current Module Alarms dialog box. The alarms are deleted only for the current
resource.