Icmp fragmentation needed [d/f set, Icmp fragmentation needed [d/f set] -71 – Finisar Surveyor User Manual

Page 275

Advertising
background image

10-71

Expert Features

Network Layer

10

ICMP Fragmentation Needed [D/F set]

Counter

ICMP Fragmentation Needed [D/F set] events are counted in the ICMP All Errors
and the ICMP Destination Unreachable counters. A count of all destination
unreachable ICMP symptoms and a count of all ICMP errors displays in the

Overview

counters of Expert View. A threshold can be set in Expert Alarms for all

destination unreachable ICMP errors or for all ICMP errors.

Expert Symptom

ICMP Fragmentation Needed [D/F] set events are automatically logged as expert
symptoms. The

Symptom Summary

field provides information about the IP

addresses involved. For example:

MTU of next Hop=2 to reach [206.250.228.69]. Cannot be

reached by [206.250.228.11] as D/F Set.

SA=[206.250.228.11] DA=[206.250.228.69]

Diagnostic Details

__________________________________________________________________

Problem Description:

An ICMP Destination (Fragmentation needed, but, D/F set) Unreachable
message has been sent.

__________________________________________________________________

Probable Cause(s):

1. If a router has a routing table problem, it may send this message.
2. If the packet needs to be fragmented and the “don’t fragment” flag is set the

host/router will send this message.

3. The source may have an incorrectly configured subnet mask.

__________________________________________________________________

Recommended Action(s):

1. Check the routing tables of the router that this message was generated from.
2. Check the netmask configuration of the source.
3. Ignore this message if the D/F is meant to be set (no action required).

Advertising