Finisar Surveyor - Manual (Page 196)

9-12
Surveyor
User’s Guide
Trap Settings for THGs
The stations to receive traps for a remote THGs can be established from the local
host running Surveyor.
To set up trap destinations for a remote THGs device, select the THGs device in the
Resource Browser and from the menu bar select
Host
→
Alarms Settings
→
SNMP
Trap settings . The SNMP Traps dialog box appears. Use the Community Settings
area to add or delete communities. List all IP addresses for the community in the
Trap Destinations area.
The community does not require read or write privileges to receive SNMP traps
containing alarms. You can disable any community from receiving traps by setting
the
Disable radio button. When you click the Disable button for a community, all IP
addresses set as Trap Destinations for the community are deleted. Figure 9-5 shows
an example SNMP Trap Settings dialog box for a THGs host.
Figure 9-5. SNMP Trap Settings for THGs