Genicom MatrixPrinter LA36 User Manual
Page 119
Advertising

5-32
If +34 volts goes below the prescribed level during printing, the printer splits one line of printing into three-pass
printing to limit the number of pin magnets excited at the same time, thus reducing the power load. If low
voltage continues even in three-pass printing, an alarm is generated.
Figure 5.31 shows the print timing and waveforms of the head pin magnet drive current.
Toffset
HDTIM
PD01~PD24
(Main excitation)
FLYBK01~FLYBK06
(Flyback)
Head current
HDTIM
PD01~PD24
FLYBK01~FLYBK06
Toffset
: Basic print operation timing
: Print head excitation time
: Flyback absorption time
: Offset time (for correcting head pin location)
Toffset
Figure 5.31 Print timing
Advertising