Genicom MatrixPrinter LA36 - Manual (Page 29)

3-8
Connect the interface cable.
Replace the interface cable.
See page 3-5, DC voltage check.
Use the correct protocol.
Use the correct baud rate.
Use the correct data length.
Use the correct data format.
No
Yes
No
Yes
No (Centronics)
Yes
No
Yes
No
Yes
No
Yes
Yes
No
No printing online
Is the interface cable connected?
Is the interface cable OK?
Is the RS-423 interface used?
Is the selected protocol OK?
Is the selected baud rate OK?
Is the selected data length OK?
Is the selected data format OK?
See page 3-5, DC voltage check.