Genicom MatrixPrinter LA36 User Manual
Page 20
2-3
3.
Remove tape securing the acoustic cover. Adhesive tape is applied along the front edge of the acoustic
cover. For LA36W printers, two adhesive tapes are applied at the back of the acoustic cover.
4.
Open the front cover and remove the print head shipping restraint (cardboard).
Cardboard
Front cover
Figure 2.2 Removing the print head shipping restraint (cardboard)
5.
At the back of the printer, remove the two tractor unit securing adhesive tapes [A]. For LA36N printers,
remove also the bail unit shipping restraints (two adhesive tapes [B] and a cardboard [C]).
B
A
C
Figure 2.3 Remove the bail stopper and four tapes (LA36N)
6.
Store the original shipping carton and packaging materials for future use, for example, in moving or
shipping the printer to another location.