Genicom MatrixPrinter LA36 User Manual

Page 30

Advertising
background image

3-9

3.3

3.3

3.3

3.3

3.3

Incorrect Printing due to Defective Nonvolatile RAM

Incorrect Printing due to Defective Nonvolatile RAM

Incorrect Printing due to Defective Nonvolatile RAM

Incorrect Printing due to Defective Nonvolatile RAM

Incorrect Printing due to Defective Nonvolatile RAM

If the printer uses defective nonvolatile RAM or the contents of nonvolatile RAM are written incorrectly,

unexpected phenomena will occur. For example:

• Printing is not performed even though no error is apparently detected. This may be caused when the interface

type specified is the Centronics parallel, but the RS-423 serial interface is mistakenly selected internally.

• Printing is not done in specified columns. This may be caused when setup parameters are mistakenly

changed internally for the character pitch.

For the above cases, do as follows:

1.

Restore the factory defaults into the RAM. See Section 4.10.3.

2.

If the printer still does not operate correctly, replace the control board (ROM board).

Advertising