Genicom MatrixPrinter LA36 - Manual (Page 25)

3-4
3.1 3.1 3.1 3.1 3.1 All Indicators Don't Light All Indicators Don't Light All Indicators Don't Light All Indicators Don't Light All Indicators Don't Light
The flowchart below shows what to do if all indicators don’t light.
All indicators don’t light.
Does the mechanism move?
Yes
No
Is the power switch turned on?
No
Yes
Turn on the power switch.
Turn off the power switch, then
insert the power plug into the
receptacle.
The control panel is defective.
Yes
Is the power plug disconnected
from the receptacle?
No
Turn off the power switch, and then
remove the AC fuse.
Is the fuse blown? Yes
No
Replace the AC fuse.
Correct the problem and make the
output live, or plug the printer into
a different receptacle.
No
Is the AC output voltage from the
receptacle to the printer power inlet
correct? (Check the AC voltage.)
Yes
To the next page