Genicom MatrixPrinter LA36 - Manual (Page 95)

5-8
(2) Cut-sheet feeding
As the platen rotates, a cut sheet is pinched between the feed roller and platen and fed forward.
To pass the printing section, the sheet is guided by the card guide and fed further between the bail roller and the
platen.
Cut sheet
Figure 5.8 Cut-sheet feeding
Feed roller
* For the bail roller, its
support mechanism differs
with LA36N and LA36W.
This is for LA36N.
Card guide
Platen
Bail roller (*)
Platen
Card guide